Mill Crusher High-pressure Raymond Mill Product Granularity 0.2-0.044mm
This machine is widely used in barite, calcite, corundum, silicon carbide, potassium feldspar, marble, limestone, dolomite, fluorite, lime, titanium dioxide, activated carbon, bentonite, kaolin, white cement, light calcium carbonate, gypsum , glass, manganese ore,
Titanium ore, refractory materials, thermal insulation materials, coal gangue, coal powder, carbon black, clay, talcum powder, shells, resin, iron oxide, Honghuangdan, quartz, petroleum coke, etc. Mohs hardness is not greater than 7, and the humidity is 6 More than 500% of medium-cost flammable and explosive materials are pulverized and processed. The particle size of the finished product can be adjusted arbitrarily within the range of 60-325 mesh, and some materials can reach up to 1000 mesh.
Main Technical Parameters
|
Model |
Number of rollers (pcs) |
Grinding roller size (mm) |
Size and Height of Grinding Ring (mm) |
Maximum feed length (mm) |
Product granularity (mm) |
Processing capacity (t/h) |
Monitor rate (KW) |
| KL-3R1510 | 3 | 150*100 | 480*100 | 15 | 0.2-0.044 | 0.3-1 | 7.5 |
| KL-3R2615 | 3 | 260*150 | 780*150 | 20 | 0.2-0.044 | 1-1.5 | 18.5 |
| KL-3R2715 | 3 | 270*150 | 830*150 | 20 | 0.2-0.044 | 1-3 | 22 |
| KL-3R3016 | 3 | 300*160 | 880*160 | 20 | 0.2-0.044 | 1-4 | 30 |
| KL-3R3018 | 3 | 300*180 | 990*180 | 20 | 0.2-0.044 | 3-5 | 30 |
| KL-4R3216 | 4 | 320*160 | 1073*160 | 25 | 0.2-0.044 | 2-6 | 37 |
| KL-4R3220 | 4 | 320*200 | 1075*200 | 25 | 0.2-0.044 | 2-7 | 37 |
| KL-5R4119 | 5 | 410*190 | 1300*190 | 35 | 0.2-0.044 | 2-8.5 | 75 |
| KL-5R4121 | 5 | 410*210 | 1300*210 | 35 | 0.2-0.044 | 3-9 | 75 |
| KL-5R4125 | 5 | 410*250 | 1300*250 | 35 | 0.2-0.044 | 5-10 | 75 |
| KL-6R4528 | 6 | 450*280 | 1600*280 | 40 | 0.2-0.044 | 3-16 | 132 |
Performance features
1. Compared with other mills, the rolling force of the grinding roller to the material is increased by 800-1200kg under the action of the high-pressure spring.
2. Energy saving, under the condition of the same output and fineness, its system energy consumption is only one-third of that of jet mill.
3. Small investment, high benefit, under the condition of the same output and fineness, its price is only 1/4 of jet mill.
4. There are few production links. Compared with the jet mill, the high-pressure micro-powder mill must first crush the 20mm material to 100 mesh before it can be processed into ultra-fine powder, while the high-pressure micro-powder mill can directly process the material with a particle size below 20mm at one time. Ultrafine powder with an average particle size of <6.5u. [Finished particle size 500 mesh - 1250 mesh (0.01 )]
5. The grinding device adopts overlapping multi-stage sealing, which has good sealing performance.
6. The dust removal effect of the high-pressure micro powder mill fully meets the national dust emission standards.
