| Wrapping Pitch | Continuosusly Variable Transmission Adjustment |
|---|---|
| Application Of Wire Diameter | Φ0.6- Φ15mm |
| Application Of Tape Plate's Wire Diameter | Φ250- Φ300mm |
| Take-up Plate Diameter Outer | Φ630mm×475mm×400mm×Φ56mm |
| Motor Power | Three Phase 380V 1.5kw Transducer |
| Type | Automatic Rolling Machine Packing Machine |
|---|---|
| Big Outer Diameter | 400mm |
| Small Outer Diameter | 140mm |
| Plate Height Range | 40-60-80mm |
| Fit For Wire Diameter | 0.8-8mm |
| Type | High Speed Cantilever Single Twisting(Cabling) Machine |
|---|---|
| Feed Wire Shaft Size | Φ400- Φ500- Φ630mm |
| Take-up Plate Diameter Outer | Φ630mm |
| Applicable Twisted | Φ0.6- Φ3.0mm |
| Max Twisted Diameter | Φ15mm |
| Type | Single Layer High Speed Wrapping Machine |
|---|---|
| Application Of Wire Diameter | φ0.6- φ15mm |
| Take-up Plate Diameter Outer | φ630mm×475mm×400mm×φ56mm |
| Motor Power | Three Phase 380V 1.5kw Transducer |
| Taping Speed | 2500rpm |
| Type | Large Section Automatic Loop Forming Machine |
|---|---|
| Maximum Speed Of Host | 150 Rpm |
| Power Of Host | 7.5HP (5.5KW) |
| Power | 5.5KW |
| Control | Shenzhen Sine Inverter |
| Type | Track Type Tractor Machine |
|---|---|
| Max Traction | 4000kg |
| Wire Diameter | φ40- φ180mm |
| Track Contact Length | 3003mm |
| Width Tack | 180mm |
| Type | Automatic High Speed Twist Machine |
|---|---|
| Rorate Speed Selection | 3000-3500-4000 |
| Pay-off Diameter | φ0.06- φ0.28mm |
| Incision Area | 0.03-0.937mm² |
| Twist Distance | 4.33-17.21mm |
| Type | Extrusion Line For Teflon (Fluorine Plastic) Cable |
|---|---|
| Screw Diameter | φ30 |
| Temperature Control | 6 Segment |
| Main Machine Pomer | 10HP |
| Extrusion Output Kg/hr | 15kg |
