The hammer crusher is composed of a hammer crushing case body, a rotor, a hammer head, a counter lining plate, a sieve plate and the like.
The hammer crusher mainly consists of an upper casing, a lower casing, a transmission member, a sieve plate member and the like. The main working component is a rotor with a hammer (also known as a hammer).
The rotor is made up of a main shaft, a disc, a pin, and a hammer. The motor drives the rotor to rotate at a high speed in the crushing chamber. The material is fed into the machine from the upper feed port, and is crushed by the impact, shearing and grinding action of the high-speed moving hammer.
In the lower part of the rotor, there is no sieve plate, and the size of the pulverized material smaller than the mesh size is discharged through the sieve plate. The coarse-grained grade larger than the mesh size is retained on the sieve plate and continues to be struck and ground by the hammer, and finally discharged through the sieve plate outside the machine.
| Model | PC300x200 | PC400x300 | PC600x400 | PC800x600 | PC1000x800 | PC1000x1000 |
| Feed particle size (mm) | 100 | 200 | 250 | 250 | 350 | 350 |
| Discharge particle size (mm) | 8 | 25 | 30 | 35 | 35 | 35 |
| Productivity(t/h) | 1-5 | 5-10 | 10-22 | 18-40 | 25-50 | 30-55 |
| Number of motor poles | 4 | 4 | 4 | 4 | 4 | 6 |
| Power(kw) | 5.5 | 11 | 11-22 | 30-55 | 75 | 90 |
| Dimensions(mm) | 630*380*630 | 900*670*860 | 1200*1050*1200 | 1310*1180*1310 | 1600*1390*1575 | 1800*1590*1775 |
| Machine weight(kg) | 200 | 800 | 1500 | 3200 | 4300 | 8000 |
