Brick Extruder Machine KLJ35L Vertical Type Single Spiral Extruder
| Product description | |||||
|
Suitable for cement, ceramic industry, small output |
|||||
| Product parameters | |||||
| Item | Capacity(T) | Extruding pressure(Mpa) | Dimension(M) | Power(KW) | Weight(T) |
| KLJ35L | 7 | 3.0 | 5*1.8*3.2 | 55+15 | 10 |
| KLJ40L | 10 | 3.0 | 5*2.0*3.2 | 75+15 | 12 |
| KLJ56/45L | 15 | 4.0 | 6*2.0*3.5 | 90+22 | 14 |
When the production is running, press the start button on the control cabinet of the electrical connection part, the upper mixing and pelletizing drive starts at the frequency set by the frequency converter, and the upper mixing and pelletizing drive drives the mixing and pelletizing shaft to rotate. The upper mixing and pelletizing shaft is equipped with stirrer and pelletizing spiral blade, and the mud is conveyed to the extrusion tank through the conveying belt. The mud is stirred and pelletized by the stirrer and pelletizing spiral blade, and then the mud passes through the plug screen plate installed in the transition vacuum chamber, and finally the mud falls into the lower vacuum chamber through the middle transition vacuum chamber. At the same time, press the lower start button, the lower drive motor starts under the frequency set by the inverter, the lower drive motor drives the lower drive pulley to rotate, and the lower drive pulley drives the pneumatic clutch on the driven pneumatic clutch pulley to idle through the lower joint group belt. The vacuum grain group will suck out the air falling into the lower vacuum box mud through the air filter. At the same time press the start button of the lower pneumatic clutch pulley, the air source solenoid valve of the pneumatic clutch pulley works, the lower clutch pulley is sucked by air to drive the lower differential speed reducer to work, and the lower differential speed reducer drives the lower extrusion spindle to rotate movement through the key connection. At the same time, the driving teeth of the mud press shaft installed on the lower extrusion spindle rotate the mud press shaft through the teeth of the rollers of the mud press shaft, and the mud press screw installed on the mud press shaft rotates with the mud press shaft to press the mud of the upper stage into the receiving screw leaf. The receiving screw leaf rotates with the extruding spindle and conveys the mud to the compressing screw leaf, which compresses the mud and conveys it to the extruding screw leaf, which further compresses and squeezes the mud to move forward. The mud is interrupted by the mud bar installed on the mud cylinder, so that the mud will not be extruded by the spiral leaves at all levels for a long time and produce spiral patterns, and the mud will be extruded by the back of the mud and continue to move forward to the extrusion spiral leaves, and then extruded into the pressure head by the extrusion spiral leaves, and then extruded into the next production process through the molding die.
R & D Team
